& nbsp; The smoothness of various parts such as the gearbox, gearbox, and external gears, as well as the hydraulic oil, shall be carried out according to the requirements in the smoothness table. What are the maintenance rules for hydraulic elevator mechanical equipment? The brakes of each organization should be regularly inspected and adjusted for the clearance between the brake pads and brake wheels to ensure sensitivity and reliability. On the conflict surface, there should be no dirt present, and it is necessary to wash it off with gasoline or thinner when encountering dirt.
& nbsp; Regularly check the connection status of each part of the hydraulic lift, and tighten it if there is any looseness. The tightness of the connecting bolts of the machine body should be checked when the machine body is under pressure. All connecting shafts must have open pins and be fully opened. Pay attention to checking for broken wires and loose strands in each section of the steel wire rope. If it exceeds the relevant rules, it is necessary to replace it immediately. The protection and maintenance of steel wire ropes should strictly follow the GB5144-85 rules.
& nbsp; When installing, disassembling, and adjusting the reverse organization, attention should be paid to ensuring that the centerline of the reverse organization reducer is parallel to the centerline of the gear, and its meshing surface is not less than 70%. The meshing gap should be appropriate. Regularly check whether the work of each organization is normal and whether there is any noise. If any problems are found, it is necessary to clean them up in a timely manner.
& nbsp; When encountering overheating of the hydraulic elevator motor, it is necessary to park it in a timely manner, clean the problem, and then continue running. The motor bearings should be smooth and outstanding. Regularly check all wires and cables for damage. Timely bandage and replace the damaged parts.
